HMG C71 Speedline Synthetic Alkyd Enamel Paint - 1 Litre

HMG C71 Speedline is a high-quality, fast-drying 1K synthetic alkyd enamel designed to provide a durable professional finish. It offers fast surface drying, good through-drying even in thicker films, and outstanding film hardness and toughness. Yellowing is minimal even after prolonged exposure to higher temperatures.

Key features

• High-quality 1K synthetic alkyd enamel
• Fast surface drying
• Good through-drying, including in thicker films
• Outstanding film hardness and toughness
• Minimal yellowing at elevated temperatures
• Ready for use - no mixing required
• Normally requires 2 coats
• Suitable for compliant spray gun, brush, aerosol, airless or air-assisted spray

Drying times at 20°C

• Touch dry: approximately 2 hours
• Hard dry: approximately 4 hours
• Full dry: approximately 12 hours

Technical information

• Product code: TOPC71
• Coverage: approximately 8 m² per litre at 50 microns DFT
• Flash point: 29°C
• Temperature resistance: up to 170°C, depending on colour
• Maximum VOC content (RFU): 0.45 kg/L
• Storage: 5°C-25°C in a sealed container
• Shelf life: 12 months from delivery date in original sealed containers
• Typical uses include agricultural equipment, appliances and machinery

Surface preparation

Surfaces should be dry, clean and free from contaminants before coating. Use the appropriate HMG preparation and primer system for the substrate. Refer to the current HMG TDS and SDS before use.

Health & safety

Warning - UN1263. The product label states that this paint is flammable and should be kept away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

• Keep out of reach of children.
• Read the product label carefully and follow all instructions.
• May cause damage to organs through prolonged or repeated exposure.
• Toxic to aquatic life with long-lasting effects.
• May cause an allergic skin reaction.
• May cause drowsiness or dizziness.
• Do not breathe dust, fume, gas, mist, vapours or spray.
• Use suitable respiratory protection and appropriate ventilation when spraying.
• If on skin or hair, remove contaminated clothing immediately and rinse skin with water or shower.
• Store locked up and dispose of contents/container in accordance with applicable local regulations.

If medical advice is needed, have the product container or label at hand. Always consult the current HMG Safety Data Sheet (SDS), Technical Data Sheet (TDS) and the label on the specific colour supplied before use. Hazard information can vary by formulation or colour.

Related products

Compare our paints and primers, including HMG KX undercoat and HMG BDX primer. Select preparation products and thinners only as specified in the current HMG technical data sheet.