{"title":"HMG Paints \u0026 Primers","description":"\u003cp\u003eShop HMG Paints Ltd industrial coatings at Kenrika Supplies, including C71 Speedline synthetic alkyd enamel, HB48 red oxide primer, BDX primer and KX undercoat. Order online for UK delivery or collect eligible in-stock items from Sandwich Marina, Kent.\u003c\/p\u003e\u003cp\u003eCheck substrate compatibility, preparation instructions and the recommended coating system before ordering.\u003c\/p\u003e","products":[{"product_id":"hmg-c71-speedline-synthetic-alkyd-enamel-paint-1-litre","title":"HMG C71 Speedline Synthetic Alkyd Enamel Paint - 1 Litre","description":"\u003cp\u003eHMG C71 Speedline is a high-quality, fast-drying 1K synthetic alkyd enamel designed to provide a durable professional finish. It offers fast surface drying, good through-drying even in thicker films, and outstanding film hardness and toughness. Yellowing is minimal even after prolonged exposure to higher temperatures.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality 1K synthetic alkyd enamel\u003c\/li\u003e\n\u003cli\u003eFast surface drying\u003c\/li\u003e\n\u003cli\u003eGood through-drying, including in thicker films\u003c\/li\u003e\n\u003cli\u003eOutstanding film hardness and toughness\u003c\/li\u003e\n\u003cli\u003eMinimal yellowing at elevated temperatures\u003c\/li\u003e\n\u003cli\u003eReady for use - no mixing required\u003c\/li\u003e\n\u003cli\u003eNormally requires 2 coats\u003c\/li\u003e\n\u003cli\u003eSuitable for compliant spray gun, brush, aerosol, airless or air-assisted spray\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDrying times at 20°C\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTouch dry: approximately 2 hours\u003c\/li\u003e\n\u003cli\u003eHard dry: approximately 4 hours\u003c\/li\u003e\n\u003cli\u003eFull dry: approximately 12 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct code: TOPC71\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 8 m² per litre at 50 microns DFT\u003c\/li\u003e\n\u003cli\u003eFlash point: 29°C\u003c\/li\u003e\n\u003cli\u003eTemperature resistance: up to 170°C, depending on colour\u003c\/li\u003e\n\u003cli\u003eMaximum VOC content (RFU): 0.45 kg\/L\u003c\/li\u003e\n\u003cli\u003eStorage: 5°C-25°C in a sealed container\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months from delivery date in original sealed containers\u003c\/li\u003e\n\u003cli\u003eTypical uses include agricultural equipment, appliances and machinery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSurface preparation\u003c\/h3\u003e\n\u003cp\u003eSurfaces should be dry, clean and free from contaminants before coating. Use the appropriate HMG preparation and primer system for the substrate. Refer to the current HMG TDS and SDS before use.\u003c\/p\u003e\n\u003ch3\u003eHealth \u0026amp; safety\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarning - UN1263.\u003c\/strong\u003e The product label states that this paint is flammable and should be kept away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKeep out of reach of children.\u003c\/li\u003e\n\u003cli\u003eRead the product label carefully and follow all instructions.\u003c\/li\u003e\n\u003cli\u003eMay cause damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003cli\u003eToxic to aquatic life with long-lasting effects.\u003c\/li\u003e\n\u003cli\u003eMay cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eMay cause drowsiness or dizziness.\u003c\/li\u003e\n\u003cli\u003eDo not breathe dust, fume, gas, mist, vapours or spray.\u003c\/li\u003e\n\u003cli\u003eUse suitable respiratory protection and appropriate ventilation when spraying.\u003c\/li\u003e\n\u003cli\u003eIf on skin or hair, remove contaminated clothing immediately and rinse skin with water or shower.\u003c\/li\u003e\n\u003cli\u003eStore locked up and dispose of contents\/container in accordance with applicable local regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf medical advice is needed, have the product container or label at hand. Always consult the current HMG Safety Data Sheet (SDS), Technical Data Sheet (TDS) and the label on the specific colour supplied before use. Hazard information can vary by formulation or colour.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eCompare our \u003ca href=\"\/collections\/paints-primers\"\u003epaints and primers\u003c\/a\u003e, including \u003ca href=\"\/products\/hmg-kx-undercoat-primer-1-litre\"\u003eHMG KX undercoat\u003c\/a\u003e and \u003ca href=\"\/products\/hmg-synthetic-bdx-primer-light-grey-7118-1-litre\"\u003eHMG BDX primer\u003c\/a\u003e. Select preparation products and thinners only as specified in the current HMG technical data sheet.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"Ramsgate White \/ 1 Litre","offer_id":59199391236444,"sku":"TOPC71-RAMSGATE-WHITE-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Pegwell Red \/ 1 Litre","offer_id":59199440191836,"sku":"TOPC71-PEGWELL-RED-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Holden Grey \/ 1 Litre","offer_id":59199440224604,"sku":"TOPC71-HOLDEN-GREY-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Preston Grey \/ 1 Litre","offer_id":59199440257372,"sku":"TOPC71-PRESTON-GREY-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Broadstairs Yellow \/ 1 Litre","offer_id":59199440290140,"sku":"TOPC71-BROADSTAIRS-YELLOW-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Sandwich Blue \/ 1 Litre","offer_id":59199440322908,"sku":"TOPC71-SANDWICH-BLUE-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"RAL 9005 Full Gloss Black \/ 1 Litre","offer_id":59199440355676,"sku":"TOPC71-RAL9005-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Shearwater Cream \/ 1 Litre","offer_id":59199440388444,"sku":"TOPC71-SHEARWATER-CREAM-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Minster Blue \/ 1 Litre","offer_id":59199440421212,"sku":"TOPC71-MINSTER-BLUE-1L","price":17.0,"currency_code":"GBP","in_stock":true},{"title":"Ash Green \/ 1 Litre","offer_id":59199440453980,"sku":"TOPC71-ASH-GREEN-1L","price":17.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-c71-speedline-colour-range-1.png?v=1789814590"},{"product_id":"hmg-kx-undercoat-primer-1-litre","title":"HMG KX Undercoat Primer - 1 Litre","description":"\u003cp\u003e\u003cstrong\u003eHMG KX Undercoat\u003c\/strong\u003e is a high-build polyurethane alkyd undercoat formulated for use under HMG synthetic topcoats. It offers excellent wet-edge characteristics and strong topcoat holdout, helping provide a smooth, consistent base before finishing coats.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-build polyurethane alkyd undercoat\u003c\/li\u003e\n\u003cli\u003eFormulated for HMG synthetic topcoats\u003c\/li\u003e\n\u003cli\u003eExcellent wet edge and topcoat holdout\u003c\/li\u003e\n\u003cli\u003eAvailable here in Light Grey, White and Dark Grey\u003c\/li\u003e\n\u003cli\u003e1 litre pack size\u003c\/li\u003e\n\u003cli\u003eManufacturer product code: PRIKX\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCoverage: approximately 14 m² per litre at 55 microns DFT\u003c\/li\u003e\n\u003cli\u003eFlash point: over 30°C\u003c\/li\u003e\n\u003cli\u003eMaximum VOC content: 0.456 kg\/L\u003c\/li\u003e\n\u003cli\u003eStorage: 5°C-25°C in sealed containers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHMG lists BDX Primer among suggested primer\/filler\/sealer systems. Follow the current HMG Technical Data Sheet, Safety Data Sheet and product label for surface preparation, thinning, application and drying guidance.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eBrowse \u003ca href=\"\/products\/hmg-c71-speedline-synthetic-alkyd-enamel-paint-1-litre\"\u003eHMG C71 Speedline enamel\u003c\/a\u003e and \u003ca href=\"\/products\/hmg-synthetic-bdx-primer-light-grey-7118-1-litre\"\u003eHMG BDX primer\u003c\/a\u003e, or compare all \u003ca href=\"\/collections\/paints-primers\"\u003epaints and primers\u003c\/a\u003e. Check the current HMG technical data sheet for the correct coating system.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"Light Grey \/ 1 Litre","offer_id":59199834882396,"sku":"PRIKX-LIGHT-GREY-1L","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"White \/ 1 Litre","offer_id":59199834915164,"sku":"PRIKX-WHITE-1L","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"Dark Grey \/ 1 Litre","offer_id":59199834947932,"sku":"PRIKX-DARK-GREY-1L","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-kx-undercoat-colour-range-1l.png?v=1789816855"},{"product_id":"hmg-synthetic-bdx-primer-light-grey-7118-1-litre","title":"HMG Synthetic BDX Primer - Light Grey (7118) - 1 Litre","description":"\u003cp\u003eHMG Synthetic BDX Primer is a high-build, anti-corrosive 1K alkyd primer for use under HMG synthetic topcoats. It combines high build with excellent sandability after a short drying period, together with good application and scratch-filling properties.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-build 1K alkyd primer\u003c\/li\u003e\n\u003cli\u003eAnti-corrosive properties\u003c\/li\u003e\n\u003cli\u003eExcellent sandability\u003c\/li\u003e\n\u003cli\u003eGood scratch-filling properties\u003c\/li\u003e\n\u003cli\u003eSuitable for use under HMG synthetic topcoats\u003c\/li\u003e\n\u003cli\u003eCan be applied by brush or compliant spray gun\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrush: base 95 \/ thinner up to 5%\u003c\/li\u003e\n\u003cli\u003eCompliant spray gun: base 90 \/ thinner up to 10%\u003c\/li\u003e\n\u003cli\u003eThinner options: HMG Thinner 2611 or 2612\u003c\/li\u003e\n\u003cli\u003eSpray gun setup: 1.6-1.8 mm\u003c\/li\u003e\n\u003cli\u003eNumber of coats: 1 light coat plus 1 full coat\u003c\/li\u003e\n\u003cli\u003eFlash off: approximately 15 minutes between coats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDrying times at 20°C\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eTouch dry: approximately 4 hours\u003c\/li\u003e\n\u003cli\u003eHard dry: approximately 24 hours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct code: PRIBDX\u003c\/li\u003e\n\u003cli\u003eColour: Light Grey (7118)\u003c\/li\u003e\n\u003cli\u003ePack size: 1 litre\u003c\/li\u003e\n\u003cli\u003eSolids by volume: 55%\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 16.6 m² per litre at 55 microns DFT\u003c\/li\u003e\n\u003cli\u003eFlash point: 38°C\u003c\/li\u003e\n\u003cli\u003eTemperature resistance: up to 120°C\u003c\/li\u003e\n\u003cli\u003eMaximum VOC content (RFU): 0.480 kg\/L\u003c\/li\u003e\n\u003cli\u003eStorage: 5°C-25°C; keep container sealed when not in use\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months from delivery date in original sealed containers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface preparation\u003c\/h3\u003e\u003cp\u003eEnsure surfaces are dry, clean and free from contaminants before coating. Follow the current HMG preparation guidance and use the appropriate cleaning and primer system for the substrate.\u003c\/p\u003e\u003ch3\u003eHealth \u0026amp; safety\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDanger - UN1263.\u003c\/strong\u003e The product label identifies this material as a flammable liquid and vapour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCauses damage to organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003cli\u003eToxic to aquatic life with long-lasting effects.\u003c\/li\u003e\n\u003cli\u003eMay cause an allergic skin reaction.\u003c\/li\u003e\n\u003cli\u003eMay cause drowsiness or dizziness.\u003c\/li\u003e\n\u003cli\u003eKeep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.\u003c\/li\u003e\n\u003cli\u003eDo not breathe dust, fume, gas, mist, vapours or spray.\u003c\/li\u003e\n\u003cli\u003eUse suitable respiratory protection and adequate ventilation when spraying.\u003c\/li\u003e\n\u003cli\u003eIf on skin or hair, remove contaminated clothing immediately and rinse skin with water or shower.\u003c\/li\u003e\n\u003cli\u003eStore locked up and dispose of contents\/container in accordance with applicable regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways read and follow the current HMG product label, Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before use or disposal.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eBrowse \u003ca href=\"\/products\/hmg-c71-speedline-synthetic-alkyd-enamel-paint-1-litre\"\u003eHMG C71 Speedline enamel\u003c\/a\u003e and \u003ca href=\"\/products\/hmg-thinner-2612-1-litre\"\u003eHMG thinner options\u003c\/a\u003e. Match the thinner code and coating system to the current HMG technical data sheet.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"Light Grey (7118) \/ 1 Litre","offer_id":59200032538972,"sku":"PRIBDX","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-bdx-synthetic-primer-light-grey-7118-1l.png?v=1789817573"},{"product_id":"hmg-thinner-2612-1-litre","title":"HMG Thinner 2612 \/ 2621 - 1 Litre","description":"\u003cp\u003e\u003cstrong\u003eHMG Thinner 2612\u003c\/strong\u003e and \u003cstrong\u003eHMG Thinner 2621\u003c\/strong\u003e are professional solvent thinners supplied in 1 litre tins for use in compatible HMG paint systems. Select the exact thinner specified by the current Technical Data Sheet for the coating being applied.\u003c\/p\u003e\u003ch3\u003eAvailable variants\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner 2612\u003c\/strong\u003e - 1 Litre - manufacturer code TNR2612. HMG describes 2612 as a slow thinner for recommended HMG systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThinner 2621\u003c\/strong\u003e - 1 Litre - manufacturer code TNR2621. For use in recommended HMG systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cp\u003eHMG Synthetic BDX Primer documentation lists 2611 or 2612 as suitable thinner options. Do not assume the same reduction ratio applies to 2621: always use the thinner and ratio specified for the exact HMG coating system.\u003c\/p\u003e\u003ch3\u003eHealth \u0026amp; safety\u003c\/h3\u003e\u003cp\u003eThese are professional solvent products. Read the current HMG Safety Data Sheet, Technical Data Sheet and the label on the specific thinner before use, storage or disposal. Keep away from heat and ignition sources, use suitable ventilation and PPE, and follow all product-specific hazard precautions.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eView \u003ca href=\"\/products\/hmg-synthetic-bdx-primer-light-grey-7118-1-litre\"\u003eHMG BDX primer\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/paints-primers\"\u003epaint and primer range\u003c\/a\u003e. Thinner grades are not interchangeable; follow the technical data sheet for the exact coating.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"2612","offer_id":59200135299420,"sku":"TNR2612","price":16.0,"currency_code":"GBP","in_stock":true},{"title":"2621","offer_id":59200166527324,"sku":"TNR2621","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-thinner-2612-1l.png?v=1789817978"},{"product_id":"hmg-ferrozinc-water-based-rust-converter-250ml","title":"HMG Ferrozinc Water-Based Rust Converter - 250ml","description":"\u003cp\u003e\u003cstrong\u003eHMG Ferrozinc\u003c\/strong\u003e is a high-performance water-based rust converter for previously rusted ferrous metal where complete rust removal is difficult or impractical. A colour change from white to navy\/black indicates that the rust-conversion reaction has taken place.\u003c\/p\u003e\u003ch3\u003eSuitable applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStructural steel\u003c\/li\u003e\n\u003cli\u003eFences and iron railings\u003c\/li\u003e\n\u003cli\u003eGuttering and external ferrous metalwork\u003c\/li\u003e\n\u003cli\u003eVehicles and machinery\u003c\/li\u003e\n\u003cli\u003eOther rusted ferrous-metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFor rusted ferrous metal only.\u003c\/strong\u003e It is not designed for use over existing coatings, stainless steel, galvanised metal, copper or aluminium.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWater-based rust converter\u003c\/li\u003e\n\u003cli\u003eSingle-coat application after loose rust is removed\u003c\/li\u003e\n\u003cli\u003eWhite-to-navy\/black colour change indicates conversion\u003c\/li\u003e\n\u003cli\u003e250ml pack\u003c\/li\u003e\n\u003cli\u003eManufacturer code: PRIFERRO\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eWire brush, scrape or mechanically remove loose rust and contamination.\u003c\/li\u003e\n\u003cli\u003eApply a light coat to the rusted ferrous areas in accordance with the current HMG technical data sheet.\u003c\/li\u003e\n\u003cli\u003eAllow the conversion and drying process to complete.\u003c\/li\u003e\n\u003cli\u003eFor prolonged corrosion resistance, HMG's technical data sheet recommends overcoating with a suitable primer and topcoat system.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eHMG's retail product page also describes Ferrozinc as a no-primer-required rust converter; for system design and long-term protection, follow the current Technical Data Sheet for the coating system you are using.\u003c\/p\u003e\u003cp\u003eAlways read and follow the current HMG Technical Data Sheet, Safety Data Sheet and product label before use.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eBrowse our \u003ca href=\"\/collections\/paints-primers\"\u003epaints and primers\u003c\/a\u003e for the next stage of your project. Confirm the appropriate overcoating system with HMG before application.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"Default Title","offer_id":59200236487004,"sku":"PRIFERRO","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-ferrozinc-rust-converter-250ml-range.png?v=1789818438"},{"product_id":"hmg-hb48-quick-drying-primer-red-oxide-10480-5-litre","title":"HMG HB48 Quick Drying Primer - Red Oxide (10480) - 5 Litre","description":"\u003cp\u003eHMG HB48 Primer is a quick-drying alkyd primer designed for suitably prepared structural steel, chassis and steel fabrication. It contains modified zinc phosphate to provide strong adhesion, moisture resistance and corrosion protection, and is suitable for airless or conventional spray application.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eQuick-drying alkyd primer\u003c\/li\u003e\n\u003cli\u003eOutstanding adhesion\u003c\/li\u003e\n\u003cli\u003eMoisture-resistant\u003c\/li\u003e\n\u003cli\u003eCorrosion protection from modified zinc phosphate\u003c\/li\u003e\n\u003cli\u003eDesigned for structural steelwork, chassis and steel fabrication\u003c\/li\u003e\n\u003cli\u003eSuitable for airless or conventional spray application\u003c\/li\u003e\n\u003cli\u003eEasy to apply at high wet-film thickness with good resistance to runs and sags\u003c\/li\u003e\n\u003cli\u003eSuitable for use under HMG QAD Enamel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical information\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eProduct: HB48 Primer\u003c\/li\u003e\n\u003cli\u003eProduct code: PRI48\u003c\/li\u003e\n\u003cli\u003eColour: Red Oxide (10480)\u003c\/li\u003e\n\u003cli\u003ePack size: 5 litres\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 10 m² per litre at 55 microns DFT\u003c\/li\u003e\n\u003cli\u003eFlash point: 24°C\u003c\/li\u003e\n\u003cli\u003eMaximum VOC content: less than 0.450 kg\/L\u003c\/li\u003e\n\u003cli\u003eStorage: 5°C-25°C; keep container sealed when not in use\u003c\/li\u003e\n\u003cli\u003eShelf life: 12 months from delivery date in original sealed containers\u003c\/li\u003e\n\u003cli\u003eCorrosion resistance: suitable for steel substrates intended for C1 and C2 environments in accordance with ISO 12944-2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSurface preparation\u003c\/h3\u003e\u003cp\u003eEnsure surfaces are dry, properly prepared and free from grease, oil, dirt and other contaminants before application. Follow the current HMG surface-preparation guidance and use the correct preparation system for the substrate.\u003c\/p\u003e\u003ch3\u003eHealth \u0026amp; safety\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWarning - UN1263.\u003c\/strong\u003e The product label identifies this material as a flammable liquid and vapour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMay cause damage to hearing organs through prolonged or repeated exposure.\u003c\/li\u003e\n\u003cli\u003eCauses skin irritation.\u003c\/li\u003e\n\u003cli\u003eCauses serious eye irritation.\u003c\/li\u003e\n\u003cli\u003eHarmful to aquatic life with long-lasting effects.\u003c\/li\u003e\n\u003cli\u003eKeep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.\u003c\/li\u003e\n\u003cli\u003eUse suitable ventilation and respiratory protection when spraying.\u003c\/li\u003e\n\u003cli\u003eDo not breathe dust, fume, gas, mist, vapours or spray.\u003c\/li\u003e\n\u003cli\u003eIf on skin or hair, remove contaminated clothing immediately and rinse skin with water or shower.\u003c\/li\u003e\n\u003cli\u003eIf in eyes, rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do, then continue rinsing.\u003c\/li\u003e\n\u003cli\u003eDispose of contents and container in accordance with applicable regulations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways read the current HMG product label, Technical Data Sheet and Safety Data Sheet before use, storage or disposal.\u003c\/p\u003e\u003ch3\u003eRelated products\u003c\/h3\u003e\u003cp\u003eCompare the \u003ca href=\"\/collections\/paints-primers\"\u003epaint and primer range\u003c\/a\u003e. Use the preparation and topcoat system specified by the current HMG technical data sheet.\u003c\/p\u003e","brand":"HMG Paints Ltd","offers":[{"title":"Red Oxide (10480) \/ 5 Litre","offer_id":59200516522332,"sku":"PRI48","price":37.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/files\/hmg-hb48-primer-red-oxide-5l.png?v=1789819433"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1046\/7822\/8316\/collections\/hmg-c71-speedline-colour-range-1.png?v=1791834106","url":"https:\/\/www.kenrika.co.uk\/collections\/hmg-paints-primers.oembed","provider":"Kenrika Supplies","version":"1.0","type":"link"}